Seamless tee

In industrial and civil buildings, metal piping systems are everywhere.

The traditional construction method to connect the metal pipes is seamless tee joint and flange joint seamless tee.

It is a new process method to connect the metal pipe with seamless tee and matching groove pipe fitting. It is the revolution of metal pipe connection.

Compared with traditional construction methods. Seamless three-way connection system has the following notable advantages:

1. Seamless three-way and corresponding pipe fittings are installed in the pipeline. No welding is required in the construction. No secondary galvanization or secondary installation is required. Improved the installation speed of seamless three-way.

2. Easy and seamless three-way light weight, small number of bolts, convenient installation, no special technology required.

3. Reliable scientific and reasonable structural design, seamless three-way with unique c-type rubber sealing ring and realize triple seal, ensure the reliability of connection seal.

4, safe Use seamless tee and corresponding pipe installation, mechanical assembly, no welding, no open flame, therefore, no welding slag pollution line, can ensure the security of the site, under the condition of the construction of fire environment, the standard is appropriate.

5. Due to the rapid installation of seamless three-way installation and the low maintenance rate, the installation of the integrated installation is less than 30 to 50%.

6, small footprint Seamless tee junction space accounts for about 70% of the flange, and less because the quantity of the bolt and omnidirectional, seamless tee is especially under the condition of space environment construction.

7. Complete seamless three-way accessories and all kinds of specifications, design or construction can be based on any combination of requirements, unnecessary complicated pipe network.

8, simple maintenance, safe and reliable quality of products such as seamless tee, as long as the installation properly, the line will be a test qualified, safe operation, daily maintenance unnecessary, seamless tee of spare parts for decades without replacement.

9. The applicable pipe material can be used to connect various seamless steel pipes, galvanized steel pipes, welded steel tubes, stainless steel tubes, copper pipes and other metal pipes.

10, which can realize flexible connection of pipeline Flexible seamless tee connection line in the flexible system, can absorb the pipe due to the temperature change of the length of the displacement and allow the pipe has a certain deviation Angle, in addition, seamless tee has cushioning effect.

Compared with flange connection, the initial cost of seamless three-way connection is 20 to 30% lower than that of flange connection. The service life is longer than the flange connection, and the installation and maintenance is simple and fast. The advantages of its economic technology are obvious. In particular, the development of seamless three-way production technology has improved greatly in recent years. But due to the influence of traditional ideas, over the years, or as a result of both at home and abroad have been using seamless tee and achieved good results of engineering knowledge is not enough, some engineering managers in most parts of the country on the new fittings are not acceptable. As designers, we should choose a new seamless three-way product which is of high quality and reasonable price, so as to make it more widely used.