Several considerations for using the reducer

TIME：2019-05-25

The size head is also called the reducer, which is used to connect different sizes of tubes; Generally it is divided into concentric reducer and eccentric reducer...

The size head is also called the reducer, which is used to connect different sizes of tubes; Generally it is divided into concentric reducer and eccentric reducer, when reducer up after projection is concentric circles of the two ports, it is called concentric reducer, and projection of eccentric reducer is a small round cut inside in the outer circle.

Apply dry cloth to clean the side of the socket and the outside of the socket, and wipe clean with acetone when the surface is sticky. Note the following points:

Diameter: 1. The control DIN standard (DN10-6), 3 a/IDF criteria (1/2 "to 6"), ISO standard (12.7-152.4 Ф Ф);

2. International industrial standards: DIN, ISO, SMS, 3A, IDF, etc.

3. Product materials: stainless steel 304, 316, 316L;

4. Quality and purpose: the polishing equipment shall be used to meet the surface precision requirements on the inside and outside of the head. This product is suitable for dairy, food, beer, beverage, pharmaceutical, cosmetics and other industrial areas.

5. External processing: we can process non-standard products according to the requirements of users;

6. Connection mode: card (quick pack) type, welding type, thread (live) type.